Aurel Ashgrove 130 f/5 Dobsonian, with Dobsonian base
130 mm aperture · 650 mm focal length · f/5
$1,029
Catalog preview. Not available for purchase.
- Bundle
- Tube with Dobsonian base
- Finish
- Carbon fiber tube
- Accessory kit
- Planetary kit
- Edition
- 2025 edition
Specifications
| Optical design | Parabolic Newtonian reflector on a Dobsonian alt-azimuth rocker base |
|---|---|
| Aperture | 130 mm |
| Focal length | 650 mm |
| Focal ratio | f/5.0 |
| Max useful magnification | 260x |
| Dawes limit | 0.89 arcsec |
| Limiting magnitude | 12.6 |
| Tube weight | 9.8 kg |
| Focuser | 2 in rack-and-pinion with 1.25 in adapter |
| Finder | 6x30 optical finder with bracket |
| Bundle | Tube with Dobsonian base |
| Finish | Carbon fiber tube |
| Accessory kit | Planetary kit |
| Edition | 2025 edition |
Description
The Ashgrove 130 f/5 is a Newtonian reflector mounted on a Dobsonian rocker base. Its 130 mm parabolic primary mirror gathers light at a focal length of 650 mm, a focal ratio of f/5. That ratio keeps the optical tube short while giving a wide field at low power, and you can still reach high magnification on the Moon and the planets with a short focal length eyepiece.
The primary mirror is aluminized and overcoated with silicon monoxide to reflect most visible light. The secondary mirror is held by a three-vane spider and adjusts with three screws, so you can align the optics with a laser collimator when the views soften. Because the tube is open at the top, it takes time to reach outdoor temperature. Set the telescope outside about 30 to 45 minutes before you begin observing, and allow more time on cold nights.
The rocker base folds down for transport, and the optical tube lifts out of its cradle. The tube weighs 9.8 kg, so you can carry it in one trip, while the base is best moved separately. The rocker base lets you point the tube at any part of the sky without a tripod or equatorial mount.
Typical targets include the bands of Jupiter, the rings of Saturn, the Orion Nebula, the Andromeda Galaxy, and globular clusters such as M13 in Hercules. Under dark skies, the 130 mm aperture shows spiral structure in brighter galaxies and resolves many stars in globular clusters.
About this configuration
Every configuration of the Aurel Ashgrove 130 f/5 Dobsonian shares the same optics; the choices below change how the telescope is mounted, finished, and equipped. A Dobsonian base needs no alignment, so you can set it on level ground and start observing within a few minutes. The base and the tube separate for transport, which makes the telescope easier to carry out of the house in two trips. Carbon fiber saves some weight compared with a metal tube, which eases the load on the mount and on your arms.
Color filters from the planetary kit can bring out surface markings on Mars and the cloud belts of Jupiter. The 2025 edition keeps the same optical figures as the earlier years of the Ashgrove line. The optical figures in the specifications table apply to this configuration and to every other version of the Aurel Ashgrove 130 f/5 Dobsonian.
What's in the box
- Optical tube assembly
- Dobsonian rocker base
- Collimation kit with laser collimator
- 6x30 optical finder with bracket
- 2 in to 1.25 in eyepiece adapter
- Front and rear dust caps
- Dobsonian rocker base with altitude bearings
- 6 mm planetary eyepiece (1.25 in)
- Four color filters (1.25 in)
Compatibility notes
- Accepts 2 in eyepieces directly and 1.25 in eyepieces through the supplied adapter.
- The rocker base fits the optical tube cradle without tools.
- The finder bracket mounts on the upper tube ring.