Aurel Umbral light pollution filter 36 mm unmounted
Light pollution · 36 mm unmounted · 180 nm bandpass
$89
Catalog preview. Not available for purchase.
- Grade
- Standard grade
- Coating
- Anti-reflection on both faces
- Case
- Aluminum case
- Edition
- 2026 edition
Specifications
| Filter type | Light pollution suppression filter |
|---|---|
| Cell | Unmounted 36 mm glass, no threaded cell |
| Bandpass (FWHM) | 180 nm |
| Peak transmission | 88% |
| Substrate | Optical crown glass |
| Glass thickness | 2.5 mm |
| Grade | Standard grade |
| Coating | Anti-reflection on both faces |
| Case | Aluminum case |
| Edition | 2026 edition |
Description
The Umbral light pollution filter is a 36 mm unmounted glass filter for telescopes that accept large-format eyepieces or filter holders. It passes a broad band about 180 nm wide while blocking the narrow emission lines of sodium and mercury street lamps, which produce much of the glow over many towns. In a suburban sky, you can use it to recover contrast while keeping most of the light from stars and extended objects.
Sodium lamps emit mainly near 589 nm, and mercury lamps emit strong lines at 436, 546, and 578 nm. The filter reduces these lines while passing much of the rest of the visible spectrum, so the sky background dims relative to the target. Unlike a narrowband nebula filter, it does not concentrate on a few emission lines, which makes it useful for galaxies, open clusters, and reflection nebulae. Stars keep their white color, because the passband is broad and covers most of the visible range. Expect the view to be dimmer overall. The benefit is strongest under suburban skies, where the glow is intense, and it is smaller at dark sites, where the background is already dim.
Galaxies and reflection nebulae keep much of their natural color through this filter, so the change in appearance is small. Hold the filter by its edges, clean the glass with a soft cloth, and keep it in its sleeve when not in use. The coatings sit on the glass surfaces, so avoid touching them. Before each session, check that the filter sits flat in its holder to avoid uneven illumination at the field edge. Allow the filter to reach the eyepiece temperature before use to reduce condensation on the glass in cold conditions. Store it away from heat and humidity, since both can degrade the coatings over time.
About this configuration
The Aurel Umbral light pollution filter 36 mm unmounted is offered in several configurations, and the notes below describe what this particular one includes. The standard grade uses the same coating design as the higher grades, with wider tolerances on flatness. Standard grade glass suits visual observing at low and medium magnification. With anti-reflection layers on both sides, less light bounces between the filter and the eyepiece or camera sensor.
The aluminum case protects the filter from crushing in a crowded accessory box. This is the 2026 edition, the most recent version of the Umbral line in the catalog. A filter does not make objects brighter; it darkens the sky background more than the target, which raises contrast.
What's in the box
- 36 mm unmounted light pollution filter
- Soft cleaning cloth
- Protective card sleeve
- Aluminum storage case
Compatibility notes
- Designed for 36 mm unmounted installation in a compatible filter holder or Dobsonian eyepiece adapter.
- Most effective under suburban skies.