Corvane Hollin equatorial mount, head only

Specifications

Description

The Hollin is a manual equatorial mount for telescopes and binoculars with a combined load up to 12 kg. Once it is leveled and polar aligned, its polar axis points at the celestial pole, so you move the telescope in right ascension and declination, the two directions in which the sky appears to turn. Setting circles on both axes help you find objects from a star chart without a computer.

Slow-motion rods on both axes let you center an object in small steps, which matters at higher magnifications, where a few arcminutes of drift can carry a target out of the field within a minute. Friction knobs set how freely each axis moves. The mount has no motors as shipped, but you can add a single-axis drive to the right ascension shaft to hold objects in the eyepiece for longer.

Telescopes up to about 100 mm aperture and 8 kg total work best on the Hollin. Keep the combined load, including the diagonal, eyepiece, finder, and counterweights, well below the rated payload. Counterweights are not included, so you will need to add them to balance the tube on the declination axis.

Before observing, point the polar axis toward Polaris in the northern hemisphere or toward Sigma Octantis in the southern hemisphere, then adjust the altitude and azimuth bolts until the polar scope reticle matches the star. Setup takes about fifteen minutes on a level surface once the tripod is spread and the head is attached.

About this configuration

The Corvane Hollin equatorial mount is sold in several configurations, and the notes below describe what this particular one includes. This configuration is the mount head alone, so you supply a tripod or a pier with a matching top plate. Buying the head only makes sense when you already own a sturdy tripod or a permanent pier in the garden. A weather cover suits observers who keep the mount outdoors on a pier or a covered patio.

Anodized black is the standard finish of the Hollin line and matches most telescope tubes. The 2026 edition carries the mechanics over unchanged and updates small parts such as the knobs and covers. The payload rating in the specifications applies to the mount head in every configuration of the Hollin line.

What's in the box

• Equatorial mount head with dovetail saddle
• Two slow-motion control rods
• Polar scope with reticle
• Accessory tray
• Fitted weather cover

Compatibility notes

• Accepts dovetail bars up to 50 mm wide.
• The 3/8-16 base thread fits most photo tripods.
• Suits telescopes up to about 100 mm aperture and 8 kg total with counterweights.