Corvane

Corvane Pivot alt-az mount, head only

Alt-az · 3 kg payload · 2.8 kg head

$99

Catalog preview. Not available for purchase.

Support
Mount head only
Add-on
Spare dovetail bar
Finish
White
Edition
2024 edition

Specifications

Mount designSingle-arm alt-azimuth
Payload capacity3 kg
Mount head weight2.8 kg
ControlManual, with slow-motion rods on both axes
TrackingNone
PowerNone required
SaddleVixen-style
SupportMount head only
Add-onSpare dovetail bar
FinishWhite
Edition2024 edition

Description

The Pivot is a light alt-azimuth mount for small telescopes, spotting scopes, and binoculars up to 3 kg. It moves in altitude, up and down, and in azimuth, side to side, which makes pointing intuitive for beginners: you aim it where you want to look, the same way you would aim a camera.

Two flexible slow-motion rods let you make small corrections in each axis without touching the telescope. That helps at higher magnifications, where the sky drifts out of the field within a minute and nudging the tube by hand would shake the image. Tension knobs on both axes set how freely the mount moves.

The Vixen-style saddle accepts the dovetail bars found on most small refractors, Maksutovs, and short reflectors. A safety screw holds the bar in place while you tighten the main clamp. The head weighs 2.8 kg and has a standard 3/8-16 thread underneath for photo tripods.

Telescopes up to about 80 mm in aperture and 1.5 kg in weight work best on the Pivot. Larger or longer tubes fit within the 3 kg payload, but they take longer to settle after you focus. As a rule, keep the total load, including a diagonal, eyepiece, and finder, well below the rated payload.

The Pivot has no motors, so it does not track the sky. For visual observing at low and medium power, that is rarely a problem. It suits quick sessions in a garden or on a balcony, where a short setup time matters more than tracking.

Pair the Pivot with a 70 mm refractor or a small Maksutov for a travel kit that fits in one bag. It also works as a stable support for spotting scopes during daytime nature viewing.

About this configuration

The Corvane Pivot alt-az mount is sold in several configurations, and the notes below describe what this particular one includes. This configuration is the mount head alone, so you supply a tripod or a pier with a matching top plate. Buying the head only makes sense when you already own a sturdy tripod or a permanent pier in the garden. A spare dovetail bar lets you keep a second telescope ready to swap onto the mount in a minute.

The white finish stays cooler in sunshine, which helps if you set up the mount in the afternoon. This is the 2024 edition, which revised the altitude adjustment and the cable routing of the Pivot line. For steady views, keep the total load of tube, finder, and camera below the rated payload with some margin to spare.

What's in the box

  • Alt-az mount head with Vixen-style saddle
  • Two slow-motion control rods
  • Accessory tray
  • Spare 200 mm dovetail bar

Compatibility notes

  • Accepts Vixen-style dovetail bars up to 45 mm wide.
  • The 3/8-16 base thread fits most photo tripods; a 1/4-20 adapter is included.
  • Suits telescopes up to about 80 mm aperture and 1.5 kg for steady views.