Corvane Pivot alt-az mount, with steel tripod
Alt-az · 3 kg payload · 2.8 kg head
$129
Catalog preview. Not available for purchase.
- Support
- With steel tripod
- Add-on
- Spare dovetail bar
- Finish
- White
- Edition
- 2026 edition
Specifications
| Mount design | Single-arm alt-azimuth |
|---|---|
| Payload capacity | 3 kg |
| Mount head weight | 2.8 kg |
| Control | Manual, with slow-motion rods on both axes |
| Tracking | None |
| Power | None required |
| Saddle | Vixen-style |
| Support | With steel tripod |
| Add-on | Spare dovetail bar |
| Finish | White |
| Edition | 2026 edition |
Description
The Pivot is a light alt-azimuth mount for small telescopes, spotting scopes, and binoculars up to 3 kg. It moves in altitude, up and down, and in azimuth, side to side, which makes pointing intuitive for beginners: you aim it where you want to look, the same way you would aim a camera.
Two flexible slow-motion rods let you make small corrections in each axis without touching the telescope. That helps at higher magnifications, where the sky drifts out of the field within a minute and nudging the tube by hand would shake the image. Tension knobs on both axes set how freely the mount moves.
The Vixen-style saddle accepts the dovetail bars found on most small refractors, Maksutovs, and short reflectors. A safety screw holds the bar in place while you tighten the main clamp. The head weighs 2.8 kg and has a standard 3/8-16 thread underneath for photo tripods.
Telescopes up to about 80 mm in aperture and 1.5 kg in weight work best on the Pivot. Larger or longer tubes fit within the 3 kg payload, but they take longer to settle after you focus. As a rule, keep the total load, including a diagonal, eyepiece, and finder, well below the rated payload.
The Pivot has no motors, so it does not track the sky. For visual observing at low and medium power, that is rarely a problem. It suits quick sessions in a garden or on a balcony, where a short setup time matters more than tracking.
Pair the Pivot with a 70 mm refractor or a small Maksutov for a travel kit that fits in one bag. It also works as a stable support for spotting scopes during daytime nature viewing.
About this configuration
This listing covers one configuration of the Corvane Pivot alt-az mount, defined by its support, add-on, finish, and edition year. The steel tripod gives a heavy, stable base that damps vibration quickly after you touch the focuser. A steel tripod adds weight to carry, but it settles fast when the wind picks up during a session. A spare dovetail bar lets you keep a second telescope ready to swap onto the mount in a minute.
The white finish stays cooler in sunshine, which helps if you set up the mount in the afternoon. This is the 2026 edition, the most recent version of the Pivot line in the catalog. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.
What's in the box
- Alt-az mount head with Vixen-style saddle
- Two slow-motion control rods
- Accessory tray
- Steel tripod with accessory tray
- Spare 200 mm dovetail bar
Compatibility notes
- Accepts Vixen-style dovetail bars up to 45 mm wide.
- The 3/8-16 base thread fits most photo tripods; a 1/4-20 adapter is included.
- Suits telescopes up to about 80 mm aperture and 1.5 kg for steady views.