Corvane Scree GoTo alt-az mount, with steel tripod

Specifications

Description

The Scree is a GoTo alt-az mount for small refractors, short reflectors, and spotting scopes with a payload of up to 4 kg. Its altitude and azimuth axes are driven by geared stepper motors, which slew the tube to any object in a built-in catalog of 42,000 targets. The catalog covers Messier, NGC, and IC objects, bright stars, and the planets and Moon. You select a target on the hand controller, and the mount moves until the object sits near the center of the field.

Before the first session, level the tripod and run the two-star alignment. The hand controller prompts you to center two bright stars in the eyepiece, and the mount uses their positions to correct for leveling error and axis offset. Alignment takes about five minutes on a stable tripod. Once aligned, the mount tracks the sky on both axes, which keeps a target steady at low and medium power. Because the mount is alt-az, the field slowly rotates around the center of the view over the course of an hour, and this rotation is visible in long-exposure photographs but not during visual observing.

The saddle is a dovetail type that accepts bars up to 45 mm wide, with a safety screw that holds the bar while you tighten the main clamp. The head weighs 2.6 kg and has a 3/8-16 thread underneath for photo tripods. The mount runs on eight AA batteries in the handle or on 12 V DC from a power tank or car adapter.

Telescopes up to about 80 mm aperture and 1.2 kg in weight suit the Scree best. Heavier tubes fit within the 4 kg rating but take longer to settle after focusing and can strain the drive at high speed. Keep the total load, including diagonal, eyepiece, and finder, well below the rated payload.

About this configuration

This listing covers one configuration of the Corvane Scree GoTo alt-az mount, defined by its support, add-on, finish, and edition year. The steel tripod gives a heavy, stable base that damps vibration quickly after you touch the focuser. A steel tripod adds weight to carry, but it settles fast when the wind picks up during a session. A padded case makes it easier to carry the mount head to a dark site without knocks to the axes.

The anodized black finish hides scratches and does not reflect the light of a red flashlight back at you. This is the 2025 edition, which enlarged the clutch knobs so you can operate them with gloves on cold nights. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.

What's in the box

• Alt-az GoTo mount head with dovetail saddle
• Hand controller with coiled cable
• Eight-AA battery holder
• Accessory tray
• Steel tripod with accessory tray
• Padded carrying case

Compatibility notes

• Accepts dovetail bars up to 45 mm wide.
• The 3/8-16 base thread fits most photo tripods; a 1/4-20 adapter is included.
• Suits telescopes up to about 80 mm aperture and 1.2 kg for steady views.
• The 12 V DC input accepts a 2.1 mm barrel plug.