Halden Anvil 254 Newtonian reflector, tube with GoTo mount
254 mm aperture · 1,143 mm focal length · f/4.5
$3,599
Catalog preview. Not available for purchase.
- Bundle
- Tube with GoTo mount
- Finish
- Gloss white
- Accessory kit
- Planetary kit
- Edition
- 2026 edition
Specifications
| Optical design | Parabolic Newtonian reflector |
|---|---|
| Aperture | 254 mm |
| Focal length | 1,143 mm |
| Focal ratio | f/4.5 |
| Max useful magnification | 508x |
| Dawes limit | 0.46 arcsec |
| Limiting magnitude | 14.0 |
| Tube weight | 14.8 kg |
| Focuser | 2 in dual-speed rack-and-pinion |
| Finder | 8x50 finderscope |
| Bundle | Tube with GoTo mount |
| Finish | Gloss white |
| Accessory kit | Planetary kit |
| Edition | 2026 edition |
Description
The Anvil 254 is a Newtonian reflector built around a 254 mm parabolic primary mirror with 1143 mm of focal length. At f/4.5, it gathers light quickly and produces a wide field at low power, which suits large nebulae, rich star clouds, and extended open clusters. The same optics also reach high magnification on the Moon and planets when paired with shorter-focal-length eyepieces.
The primary mirror is figured to a parabolic curve and coated with aluminum and a protective overcoat. Because the optical path contains no lenses, the telescope shows no chromatic aberration, and the image stays free of color fringes around bright planets and the lunar limb. The primary mirror sits in a cell with three collimation screws, and the secondary mirror is held by a four-vane spider. Check collimation before each session, since small misalignments reduce contrast on planetary detail and on close double stars. The 2 in focuser holds a heavy eyepiece steady, and its fine-focus knob allows smooth adjustment at high power.
At 14.8 kg for the tube, the Anvil 254 is suited to a Dobsonian base or to an equatorial mount rated for at least 20 kg of payload. The mirror holds heat and takes time to match outdoor air temperature, so plan on setting the telescope outside 45 to 60 minutes before observing. Typical targets include the Orion Nebula, the Andromeda Galaxy, and the Hercules Globular Cluster, which resolves into individual stars under dark skies. Jupiter's cloud belts and the Cassini Division in Saturn's rings are visible on steady nights at high power.
About this configuration
This listing covers one specific configuration of the Halden Anvil 254 Newtonian reflector, defined by its bundle, finish, accessory kit, and edition year. The GoTo mount finds objects from its database after a short alignment on two or three bright stars. The GoTo mount needs a 12 V power source, so plan for a power pack when you observe away from a mains outlet. The gloss white tube reflects sunlight, which helps it stay closer to air temperature while you set up before dusk.
Color filters from the planetary kit can bring out surface markings on Mars and the cloud belts of Jupiter. This is the 2026 edition, the most recent version of the Anvil line in the catalog. Check the specifications table for the optical figures, since they stay the same across every configuration of the Anvil line.
What's in the box
- Optical tube assembly with 254 mm primary mirror
- Secondary mirror with four-vane spider
- 8x50 finderscope with bracket
- 2 in focuser with 1.25 in eyepiece adapter
- Collimation tool
- Front and rear dust caps
- GoTo mount with steel tripod
- Hand controller and 12 V power cable
- 6 mm planetary eyepiece (1.25 in)
- Four color filters (1.25 in)
Compatibility notes
- Accepts 2 in eyepieces directly and 1.25 in eyepieces through the supplied adapter.
- Mounts on a Dobsonian base or an equatorial mount rated for at least 20 kg of payload.
- The tube has no dovetail bar, so mount it with a rocker box or a compatible tube-ring system.