Northmere

Northmere Cove manual alt-az mount, with steel pier

Alt-az · 4 kg payload · 3.2 kg head

$529

Catalog preview. Not available for purchase.

Support
With steel pier
Add-on
Padded carrying case
Finish
Anodized red
Edition
2024 edition

Specifications

Mount designSingle-column alt-azimuth
Payload capacity4 kg
Mount head weight3.2 kg
ControlManual, with slow-motion rods on both axes
TrackingNone
PowerNone required
SaddleDovetail saddle for bars up to 50 mm wide
SupportWith steel pier
Add-onPadded carrying case
FinishAnodized red
Edition2024 edition

Description

The Cove is a manual alt-azimuth mount for telescopes, spotting scopes, and binoculars with a combined load up to 4 kg. It moves in altitude, up and down, and in azimuth, side to side, so you point it at a target the same way you would aim a camera. The head weighs 3.2 kg and sits on a single column, which keeps the footprint small on a balcony or a garden table. Setup takes a few minutes: mount the head on a tripod, attach the tube, and level the head by eye before you begin.

Slow-motion rods on both axes let you make small corrections without touching the instrument. Those corrections matter at higher magnifications, where a target can leave the field within a minute and a hand nudge would shake the image. Tension knobs on each axis set how freely the head turns, so you can run it loose for sweeping or firm for holding a planet.

The dovetail saddle accepts bars up to 50 mm wide, which covers most small refractors and short reflectors. A safety screw holds the bar in place while you tighten the main clamp. The base has a standard 3/8-16 thread for photo tripods, so a tripod you already own will usually work.

Keep the total load, including a diagonal, eyepiece, and finder, well below the 4 kg rating. A telescope of about 80 mm aperture and 1.5 kg suits the Cove well. Heavier or longer tubes fit within the payload but take longer to settle after focusing.

The Cove has no motors and does not track the sky. At low and medium power, that is rarely a limit during a short session. Pair it with a 70 mm refractor for a compact observing kit that packs into one bag.

About this configuration

This listing covers one configuration of the Northmere Cove manual alt-az mount, defined by its support, add-on, finish, and edition year. The steel pier raises the mount and leaves more room under the telescope for long refractors and cameras. A pier lets the telescope swing past the meridian without the tube or the camera hitting the legs. The padded carrying case protects the mount head during travel and keeps its parts together in storage.

Anodized red parts have the same corrosion resistance as the black finish, in a brighter color. This is the 2024 edition, which revised the altitude adjustment and the cable routing of the Cove line. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.

What's in the box

  • Single-column alt-az mount head with dovetail saddle
  • Two slow-motion control rods
  • Accessory tray
  • Steel pier with leveling base
  • Padded carrying case

Compatibility notes

  • Accepts dovetail bars up to 50 mm wide.
  • The 3/8-16 base thread fits most photo tripods.
  • Suits telescopes up to about 80 mm aperture and 1.5 kg for steady views.