Northmere Crag GoTo alt-az mount, with steel pier
GoTo alt-az · 15 kg payload · 9.5 kg head
$3,269
Catalog preview. Not available for purchase.
- Support
- With steel pier
- Add-on
- Padded carrying case
- Finish
- Anodized black
- Edition
- 2024 edition
Specifications
| Mount design | Heavy-duty alt-azimuth with twin-column fork |
|---|---|
| Payload capacity | 15 kg |
| Mount head weight | 9.5 kg |
| Control | Handheld GoTo controller with USB update port |
| Tracking | Sidereal tracking on both axes with two-star alignment and pointing model |
| Power | 12 V DC, about 3 A typical |
| Saddle | Universal dovetail saddle, 76 mm (3 in) wide, with two clamps |
| Support | With steel pier |
| Add-on | Padded carrying case |
| Finish | Anodized black |
| Edition | 2024 edition |
Description
The Crag is a heavy-duty GoTo alt-az mount rated for loads up to 15 kg. It moves in altitude and azimuth, so you aim it the way you would aim a camera, and its handheld controller can slew to any of the 40,000 objects in its database. The head weighs 9.5 kg, which keeps the mount steady under a long refractor or a large Newtonian once the tube is balanced on the saddle.
Worm-gear drives on both axes move the tube in small steps and follow the sky at the sidereal rate during tracking. After a short alignment on two or three stars, the controller builds a pointing model that improves accuracy across the sky. Alt-az tracking introduces slight field rotation over long exposures. That effect is rarely visible during visual observing, but it matters if you attach a camera and expose for several minutes.
The saddle is a universal dovetail saddle, 76 mm (3 in) wide, held by two clamps. It accepts refractors, reflectors, and binocular bars. Keep the total load, including diagonal, eyepiece, finder, and any camera, well below the rated 15 kg. Balance the tube along the saddle before you start the GoTo routine, because an unbalanced load strains the drives and reduces tracking accuracy.
The mount runs on 12 V DC at about 3 A and accepts an external battery pack. The controller connects to a computer by USB, so you can update firmware and load planetarium software for object lists. Set up on a level, firm surface, because the tripod must stay still while the mount slews. Allow the mount to settle after each slew before you focus or start an exposure.
About this configuration
Each configuration of the Northmere Crag GoTo alt-az mount uses the same mount head; the options change what it stands on and what ships with it. The steel pier raises the mount and leaves more room under the telescope for long refractors and cameras. A pier lets the telescope swing past the meridian without the tube or the camera hitting the legs. A padded case makes it easier to carry the mount head to a dark site without knocks to the axes.
The anodized black finish hides scratches and does not reflect the light of a red flashlight back at you. This is the 2024 edition, which revised the altitude adjustment and the cable routing of the Crag line. The payload rating in the specifications applies to the mount head in every configuration of the Crag line.
What's in the box
- GoTo alt-az mount head
- Handheld GoTo controller
- Universal dovetail saddle with two clamps
- USB cable
- 12 V DC power cable
- Hard carry case
- Steel pier with leveling base
- Padded carrying case
Compatibility notes
- Accepts dovetail bars up to 76 mm (3 in) wide.
- Mounts to standard 3/8-16 tripod heads or a pier adapter.
- Suits refractors up to about 150 mm aperture and 10 kg for steady views.
- Controller updates over USB and works with planetarium software for object selection.