Northmere

Northmere Fellgate heavy-duty alt-az mount, with steel pier

Alt-az · 22 kg payload · 14.5 kg head

$2,349

Catalog preview. Not available for purchase.

Support
With steel pier
Add-on
No add-on
Finish
White
Edition
2023 edition

Specifications

Mount designHeavy-duty alt-azimuth with cast-aluminum yoke
Payload capacity22 kg
Mount head weight14.5 kg
ControlManual, with slow-motion rods on both axes
TrackingNone
PowerNone required
SaddleDual-screw dovetail saddle
SupportWith steel pier
Add-onNo add-on
FinishWhite
Edition2023 edition

Description

The Fellgate is a heavy-duty alt-azimuth mount for large refractors, long Newtonians, and ED binocular assemblies rated up to 22 kg. It moves in altitude, up and down, and in azimuth, side to side, so you aim it directly at the object you want to see. The head weighs 14.5 kg and rests on a cast-aluminum yoke that resists flex when the load sits far from the axis.

Slow-motion rods on both axes let you make fine corrections without touching the optical tube. That matters at high magnification, where a small hand movement shakes the image and the sky drifts out of the field within a minute. Adjustable tension knobs on each axis set how freely the head turns, so a heavy tube stays where you place it during a long session. Fine adjustment is most useful once a target is centered, when hand tracking at high power becomes tiring.

The dovetail saddle accepts bars up to 300 mm long and 60 mm wide, and two safety screws hold the bar while you tighten the main clamp. A 3/8-16 thread on the base fits standard photo tripods and pier adapters. Check the total load before you mount a telescope: include the diagonal, eyepieces, finder, and any camera, and keep it below the rated 22 kg.

The mount has no motors and does not track the sky. For visual observing at low and medium power, that is rarely a limitation. Expect a longer setup time than with a lightweight mount, since the head and tripod need level placement and secure leveling before each session. Because the head is heavy, lift it with two people or use a lifting strap when moving it between the car and the site. The Fellgate suits observing sites where the telescope stays assembled for several nights.

About this configuration

Each configuration of the Northmere Fellgate heavy-duty alt-az mount uses the same mount head; the options change what it stands on and what ships with it. The steel pier raises the mount and leaves more room under the telescope for long refractors and cameras. A pier lets the telescope swing past the meridian without the tube or the camera hitting the legs. This configuration ships without extra add-ons, so the box holds only the mount and its support.

A white mount head is easy to see in the dark, which helps you avoid walking into the tripod. The 2023 edition uses the same gears and bearings as later years, with small differences in the clamps. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.

What's in the box

  • Alt-az mount head with dovetail saddle
  • Two slow-motion control rods
  • Two tension knobs
  • 1/4-20 adapter
  • Accessory tray
  • Steel pier with leveling base

Compatibility notes

  • Accepts dovetail bars up to 300 mm long and 60 mm wide.
  • The 3/8-16 base thread fits most photo tripods; a 1/4-20 adapter is included.
  • Suits refractors and reflectors with a combined load up to 22 kg, including accessories.