Pellucid Obelisk light pollution filter 2 in
Light pollution · 2 in · 150 nm bandpass
$139
Catalog preview. Not available for purchase.
- Grade
- Standard grade
- Coating
- Standard coating
- Case
- Aluminum case
- Edition
- 2023 edition
Specifications
| Filter type | Light pollution filter |
|---|---|
| Cell | 2 in brass cell, M48 x 0.75 thread |
| Bandpass (FWHM) | 150 nm |
| Peak transmission | 90% |
| Substrate | Optical glass |
| Glass thickness | 2.5 mm |
| Grade | Standard grade |
| Coating | Standard coating |
| Case | Aluminum case |
| Edition | 2023 edition |
Description
The Obelisk light pollution filter is a broadband filter in a 2 in threaded cell. It is designed to block the sodium-vapor emission line near 589 nm and the mercury emission lines near 546 nm and 436 nm, which account for much of the glow over towns and cities. The passband is about 150 nm wide and covers most of the visible spectrum, so you will see stars and galaxies in close to natural color.
Skyglow is concentrated in the wavelengths where artificial lights put out most of their energy. By removing those lines, the filter lowers the background brightness and raises the contrast of extended objects against the sky. Because the passband is wide, the filter passes more of the light from broadband targets than a narrowband filter would, so the image stays brighter and less colored. The gain in contrast is moderate, and it depends on how much of the local lighting uses those lines.
Good targets include the Andromeda Galaxy, the Pleiades and other open clusters, the Orion Nebula, and the Lagoon Nebula viewed from suburban skies. Galaxies and clusters benefit most, since their light is spread across the spectrum and the background is what limits their visibility. The filter does little for targets under truly dark skies, where the background is already low. It also dims the view slightly, so use it in telescopes where light gathering is not limiting.
The filter screws into the front of any 2 in eyepiece or the nosepiece of a 2 in diagonal. Handle the glass by the cell and keep the coated surfaces clean with a blower and a soft brush. Store it in its case when not in use to prevent scratches.
About this configuration
The Pellucid Obelisk light pollution filter 2 in is offered in several configurations, and the notes below describe what this particular one includes. The standard grade uses the same coating design as the higher grades, with wider tolerances on flatness. Standard grade glass suits visual observing at low and medium magnification. The standard coating is applied to the filter side of the glass, with a single anti-reflection layer on the back.
The aluminum case protects the filter from crushing in a crowded accessory box. The 2023 edition uses the same coating design as later years, with small differences in the cell markings. Check the size in the specifications against your eyepiece barrels, star diagonal, or filter wheel before you choose.
What's in the box
- Light pollution filter in 2 in threaded cell
- Plastic storage case
- Aluminum storage case
Compatibility notes
- Threads into 2 in eyepieces and diagonals (M48 x 0.75).
- Suited to telescopes of any aperture under suburban skies.