Tessaro Arc alt-az mount, with steel pier

Specifications

Description

The Arc is a manual alt-azimuth mount for telescopes up to 8 kg. Adjustable friction clutches on both axes let you move the telescope by hand and have it stay exactly where you leave it, with no counterweights and no balancing.

That simple operation makes the Arc a practical mount for quick visual sessions. Set the tripod down, attach the telescope, and start observing. Large refractors, 8-inch Schmidt-Cassegrains, and 6-inch Newtonians all fit within the payload, as long as you keep the total load, with a diagonal and eyepiece, below the rating.

Slow-motion cables on both axes let you make fine corrections at high magnification without touching the tube. The cables can be removed when you prefer to push the telescope by hand. Bearing surfaces on both axes run smoothly in the cold, so the mount moves evenly on winter nights.

The single arm holds the telescope to one side, which lets long refractors point at the zenith without the eyepiece end hitting the tripod. The Vixen-style saddle has two clamping knobs and a safety stop. The altitude axis has a scale in degrees, which helps when you point at a target from its altitude in a planetarium app.

The head weighs 5.5 kg and attaches to tripods with a 3/8-16 thread. With a steel tripod, the Arc settles quickly after you focus, even with an 8-inch catadioptric telescope at 200x.

Because the Arc has no motors, it does not track. For visual observing, many users prefer that: there is no alignment, no battery, and no hand controller. For long planetary sessions, a GoTo version of the same mount is available in the catalog.

About this configuration

This listing covers one configuration of the Tessaro Arc alt-az mount, defined by its support, add-on, finish, and edition year. The steel pier raises the mount and leaves more room under the telescope for long refractors and cameras. A pier lets the telescope swing past the meridian without the tube or the camera hitting the legs. A padded case makes it easier to carry the mount head to a dark site without knocks to the axes.

The white finish stays cooler in sunshine, which helps if you set up the mount in the afternoon. The 2023 edition uses the same gears and bearings as later years, with small differences in the clamps. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.

What's in the box

• Alt-az mount head with Vixen-style saddle
• Two slow-motion cables
• Base adapter with 3/8-16 thread
• Steel pier with leveling base
• Padded carrying case

Compatibility notes

• Accepts Vixen-style dovetail bars up to 45 mm wide.
• The 3/8-16 base thread fits photo and surveying tripods.
• Suits refractors up to 120 mm, 8-inch SCTs, and 6-inch Newtonians within the 8 kg payload.