Tessaro Basin 22 EQ mount, with steel tripod

Specifications

Description

The Basin 22 is a manual German equatorial mount for telescopes and camera loads up to 22 kg. Its head weighs 14.2 kg, and both axes are graduated, so you can set the right ascension axis toward the celestial pole and then find objects by their coordinates. A counterweight shaft carries balance weights on the opposite side of the head to offset the tube and accessories.

Slow-motion cables on each axis let you follow a target once it is centred in the eyepiece. Within the 22 kg payload, a 200 mm tube settles within a few seconds after focusing, but heavier loads take longer to damp. Tighten both clutches before observing; a loose clutch lets the tube drift under its own weight at high magnification.

The mount has no motors and does not track the sky. Without a drive, stars move across the field at about 15 arcseconds per second, which is 15 arcminutes in one minute. At high power, you will need to correct the position often, so use the cables in short, steady movements rather than pushing the tube by hand.

Polar alignment uses the reticle polar scope built into the right ascension housing. Mount the head on a pier or a tripod rated well above the combined weight of the mount, tube, and counterweights. A 22 kg load on a light tripod will vibrate in wind, and each vibration takes seconds to settle.

Use the Basin 22 for visual observing with a large refractor or catadioptric, or for long-exposure photography with a camera and telephoto lens. Check the total load before each session, including the tube, diagonal, eyepieces, finder, and camera, and keep it well below the rated payload.

About this configuration

The Tessaro Basin 22 EQ mount is sold in several configurations, and the notes below describe what this particular one includes. The steel tripod gives a heavy, stable base that damps vibration quickly after you touch the focuser. A steel tripod adds weight to carry, but it settles fast when the wind picks up during a session. A weather cover suits observers who keep the mount outdoors on a pier or a covered patio.

The anodized red finish makes the clamps and knobs easier to find by touch and by red light. This is the 2025 edition, which enlarged the clutch knobs so you can operate them with gloves on cold nights. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.

What's in the box

• Equatorial mount head with 200 mm dovetail saddle
• Counterweight shaft
• Slow-motion cables for right ascension and declination
• Reticle polar alignment scope
• Accessory tray
• Steel tripod with accessory tray
• Fitted weather cover

Compatibility notes

• Accepts dovetail bars up to 50 mm wide.
• Rated for 22 kg of telescope and camera load.
• Suits large refractors and catadioptric telescopes within the rating, mounted on a pier or heavy tripod.