Tessaro Bellwether alt-az mount, with carbon fiber tripod

Specifications

Description

The Bellwether is a manual alt-azimuth mount for catadioptric telescopes and medium refractors, rated for payloads up to 12 kg. Its fork arms hold the tube on both sides of the head, so the telescope stays balanced as you move it. The mount turns in altitude, up and down, and in azimuth, side to side, so you aim it at the object you want to see and the head keeps the tube where you leave it.

Slow-motion rods on both axes allow fine corrections at high magnification, where a small hand movement shakes the image. Tension knobs set how freely each axis turns, so you can keep the head stiff for steady pointing or loosen it for quick sweeps across the sky. The 100 mm dovetail saddle accepts standard dovetail bars, and a safety screw holds the bar in place while you tighten the main clamp.

The head weighs 6.4 kg, so the Bellwether is best set on a sturdy tripod or pier. A telescope of about 150 mm aperture on a Maksutov or Schmidt-Cassegrain tube fits within the rated payload, but long tubes take longer to settle after you focus. As a rule, keep the total load, including a diagonal, eyepiece, and finder, well below the 12 kg rating.

The Bellwether has no motors and does not track the sky. Objects drift out of the field within a minute at high power, so you will need to nudge the tube by hand. The mount suits relaxed visual sessions at low and medium magnification, where a steady setup and simple controls matter more than automatic tracking.

About this configuration

This listing covers one configuration of the Tessaro Bellwether alt-az mount, defined by its support, add-on, finish, and edition year. The carbon fiber tripod saves weight for travel while still damping vibration well at moderate magnification. Carbon fiber legs stay comfortable to handle on cold nights, since they conduct less heat away from your hands than metal. The fitted weather cover keeps dew and dust off the mount if you leave it set up between sessions.

Anodized black is the standard finish of the Bellwether line and matches most telescope tubes. This is the 2026 edition, the most recent version of the Bellwether line in the catalog. Check the saddle type in the specifications against the dovetail bar on your telescope before you choose a configuration.

What's in the box

• Alt-az fork mount head
• Two slow-motion control rods
• 100 mm dovetail saddle
• Accessory tray
• Carbon fiber tripod with accessory tray
• Fitted weather cover

Compatibility notes

• Accepts dovetail bars up to 100 mm wide.
• The 3/8-16 base thread fits most photo tripods; a 1/4-20 adapter is included.
• Suits telescopes up to about 150 mm aperture and 8 kg for steady views.