Tessaro Obsidian EQ mount, with steel pier

Specifications

Description

The Obsidian EQ mount is a manual German equatorial mount for refractors, catadioptric telescopes, and short reflectors with a combined load up to 4 kg. It turns on two axes that align with the celestial pole. Once the mount is polar aligned, motion in right ascension follows the stars across the sky, and you only need to adjust declination to move between objects. The head weighs 3.2 kg, so the mount suits a compact portable setup rather than a heavy observatory tube.

Polar alignment uses a built-in polar scope with an illuminated reticle. Set the latitude scale to your site's latitude, then aim the scope at Polaris and adjust the altitude and azimuth knobs until the reticle sits on the pole. Slow-motion cables on both axes let you center objects without touching the tube, which matters at high magnification, where a small hand movement can shift the target out of view.

An optional 12 V right ascension drive attaches to the polar axis and turns the mount at sidereal rate, so objects stay centered without manual correction. Without the drive, targets leave the field within a few minutes at high power. The drive draws about 0.5 A from a 12 V battery or regulated supply, and its rate can be adjusted with a small trim knob for lunar and solar work.

The Vixen-style saddle accepts dovetail bars up to 50 mm wide, and a safety screw holds the bar while you tighten the main clamp. The head has a standard 3/8-16 thread underneath for mounting on a photo tripod. Keep the total load, including the diagonal, eyepiece, finder, and any camera, well below the 4 kg rating. A longer tube shifts the balance point, so balance it on the saddle before you start tracking.

About this configuration

This listing covers one configuration of the Tessaro Obsidian EQ mount, defined by its support, add-on, finish, and edition year. The steel pier raises the mount and leaves more room under the telescope for long refractors and cameras. A pier lets the telescope swing past the meridian without the tube or the camera hitting the legs. With a spare dovetail bar, you can fit a guide scope or a second instrument side by side.

The titanium gray finish has a hard anodized layer that resists wear on the clamp surfaces. This is the 2025 edition, which enlarged the clutch knobs so you can operate them with gloves on cold nights. For steady views, keep the total load of tube, finder, and camera below the rated payload with some margin to spare.

What's in the box

• Equatorial mount head with Vixen-style saddle
• Two slow-motion control cables
• Latitude scale and polar scope with illuminated reticle
• Accessory tray
• Steel pier with leveling base
• Spare 200 mm dovetail bar

Compatibility notes

• Accepts Vixen-style dovetail bars up to 50 mm wide.
• Suits refractors, catadioptrics, and short reflectors with a combined load up to 4 kg.
• The 3/8-16 base thread fits most photo tripods.