Tessaro Stillwater alt-az mount, with carbon fiber tripod

Specifications

Description

The Stillwater is a manual alt-azimuth mount for telescopes in the 5 to 10 kg range, including Catadioptric tubes and other medium-weight optical tubes. It moves in altitude, up and down, and in azimuth, side to side, so you point it directly at the part of the sky you want to see. The fork head has a rated payload of 7 kg and weighs 4.6 kg on its own, which leaves room for a larger Maksutov or Schmidt-Cassegrain with its accessories.

Slow-motion rods on both axes let you make fine corrections without touching the tube. At high magnification, where a field of view may drift out of frame in under a minute, these rods keep the target centered and reduce vibration. Tension knobs on each axis set how freely the head moves, so you can hold a heavy tube steady while you focus.

The dovetail saddle accepts bars up to 50 mm wide. A safety screw holds the bar in place while the main clamp is tightened, which matters with a long tube that could otherwise slip. The head has a 3/8-16 thread underneath for photo tripods, and a 1/4-20 adapter is included.

Keep the total load well below the 7 kg rating. Include the diagonal, eyepiece, finder, and any dew shield in the calculation. Heavier loads take longer to settle after focusing, and a tube close to the limit will sway when the wind picks up.

The Stillwater has no motors and does not track the sky. At low and medium power that is rarely a problem, and an object will stay in the eyepiece for a few minutes before it needs a nudge. For longer sessions or higher magnification, a GoTo or tracking mount is a better fit.

About this configuration

Each configuration of the Tessaro Stillwater alt-az mount uses the same mount head; the options change what it stands on and what ships with it. The carbon fiber tripod saves weight for travel while still damping vibration well at moderate magnification. Carbon fiber legs stay comfortable to handle on cold nights, since they conduct less heat away from your hands than metal. A padded case makes it easier to carry the mount head to a dark site without knocks to the axes.

The anodized red finish makes the clamps and knobs easier to find by touch and by red light. This is the 2025 edition, which enlarged the clutch knobs so you can operate them with gloves on cold nights. For steady views, keep the total load of tube, finder, and camera below the rated payload with some margin to spare.

What's in the box

• Alt-az mount head with dovetail saddle
• Two slow-motion control rods
• 1/4-20 tripod adapter
• Accessory tray
• Carbon fiber tripod with accessory tray
• Padded carrying case

Compatibility notes

• Accepts dovetail bars up to 50 mm wide.
• Rated for a 7 kg payload, including the tube, diagonal, eyepiece, and finder.
• The 3/8-16 base thread fits most photo tripods; a 1/4-20 adapter is included.